Sheyang county Tengda flaw Detection Machine factory
Home > Product Show > MT Magnetic Particle flaw detection machine > Fixed magnetic particle flaw detection machine
Product Categories

Sheyang County, Jiangsu Province Tengda flaw Detection machine factory

Phone: 0515-82385718

Fax: 0515-82331542

Urlwww.td-ndt.cn

Email: ndt518@126.com

Add: Jiangsu Sheyang Economic Development Zone (west)

Contact Person: Mr. Zhu

Phone: 13004587009

13032599418

Fixed magnetic particle flaw detection machine

CDW-6000-type crankshaft fluorescent magnetic particle flaw detection machine

CDW-6000-type crankshaft fluorescent magnetic particle flaw detection machine

Product Details

CDW-6000-type crankshaft fluorescent magnetic particle flaw detection machine

1. Technical parameters:

Magnetization Way: Zhou Xiang, longitudinal, compound three kinds of magnetization way;

circumferential magnetization Current: AC 0-6000a effective value, continuous adjustable, with power off phase control;

Longitudinal magnetization magnetic Potential: AC 0-24000at effective value, continuous adjustable, with power off phase control;

Circumferential demagnetization Current: AC 6000-0a valid value, continuous adjustable;

Longitudinal demagnetization Magnetic Potential: AC 24000-0at effective value, continuous adjustable;

Demagnetization Way: automatic attenuation type;

Demagnetization effect: ≤0.3MT;

Electrode spacing (customizable): 0-1000mm adjustable;

Temporary load rate: ≥25%;

Clamping mode: pneumatic clamping;

Operation mode: manual/Automatic;

Flaw detection sensitivity: 15/50a1 Type test piece clear display;

Flaw detection beats: about 14 seconds/pieces (except for the observation time, the testing time and process can be adjusted according to the actual needs of the demand side;

Power supply: Three-phase four-wire 380v±5% 50Hz 150A;

Overall dimensions: approx. 2400mm (L) x750mm (W) x1500mm (H) (including spray rack height);

Compressed air: 0.4~0.6MPA;

Use environment: temperature -5℃+40℃, relative humidity ≤80%, non-corrosive gas, dust and medium frequency interference;

Quality: About 1800Kg.

2. Function and Application

CDW-6000 crankshaft magnetic particle flaw detection machine is a vertical semi-automatic special fluorescent magnetic particle flaw detection equipment. The equipment uses the manual or the semi-automatic two kinds of operation way, by the programmable controller (PLC) centralized control, the detection sensitivity has the low current, the over-temperature and so on sound and light alarm function.


热门标签:CDW-6000-type crankshaft fluorescent magnetic particle flaw detection machine

Home | About Us | Product Show | News Center | Industry knowledge | Contact Us | Walls | XML地图 | Mobile