Sheyang county Tengda flaw Detection Machine factory
Home > Product Show > MT Magnetic Particle flaw detection machine > Fixed magnetic particle flaw detection machine
Product Categories

Sheyang County, Jiangsu Province Tengda flaw Detection machine factory

Phone: 0515-82385718

Fax: 0515-82331542

Urlwww.td-ndt.cn

Email: ndt518@126.com

Add: Jiangsu Sheyang Economic Development Zone (west)

Contact Person: Mr. Zhu

Phone: 13004587009

13032599418

Fixed magnetic particle flaw detection machine

Semi-spindle semi-axle fluorescent magnetic particle flaw detector for cdw-4000a automobile

Abstract: Sheyang county Tengda flaw Detection machine factory to provide customers with CDW-4000A automotive semi-automatic fluorescent magnetic powder flaw detection machine suppliers, manufacturers, prices, which good, equipment, products are sold to Jiangsu, Shanghai, Yancheng, Kunshan, Beijing, Yingkou, Dandong and other regions.

Product Details

Semi-spindle semi-axle fluorescent magnetic particle flaw detector for cdw-4000a automobile

1. Technical parameters

circumferential magnetization Current: AC 0-4000a, effective value, continuous adjustable, with power off phase control;

Longitudinal magnetization magnetic Potential: AC 0-24000at, effective value, continuous adjustable, with power off phase control,

DC 0-12000at, half wave twice times average, continuous adjustable;

Magnetization Way: Zhou Xiang, longitudinal, compound magnetization;

Magnetization sensitivity: A type of the test piece and octagonal block show clear;

Temporary load rate: ≥25%;

Demagnetization way: Attenuation method;

Demagnetization time: 5.0-8.0s;

Demagnetization effect: ≤160a/m (0.2mT);

UV illumination: UV-400 distance from the lamp source 380 mm at the surface of the workpiece ≥6000μw/cm²;

Gas source pressure: 0.4-0.6mpa;

Power supply: Three-phase third-wire, 380v±10% 50Hz instantaneous maximum 80KVA;

Electrical protection grade: IP54;

Quality: About 1600Kg.

2. Function and Application

cdw-4000a Automotive semi-axial magnetic particle flaw detection machine series electromechanical separation, modular semi-automatic special fluorescent magnetic particle flaw detection equipment. It is composed of power control system, operating system, gripping magnetization device, fluorescent darkroom observation device, magnetic suspension circulation system and so on. It is suitable for various kinds of cracks and micro-defects which are detected by wet magnetic powder method. This equipment uses the manual inspection, the automatic detection, the semi-automatic inspection, the spot movement detection four kinds of operation way, by the programmable controller (PLC) centralized control.


热门标签:Semi-spindle semi-axle fluorescent magnetic particle flaw detector for cdw-4000a automobile

Home | About Us | Product Show | News Center | Industry knowledge | Contact Us | Walls | XML地图 | Mobile