CDG-3000 connecting rod semi-automatic fluorescent magnetic particle flaw detection machine

CDG-3000 connecting Rod HalfAutomatic fluorescent magnetic powder flaw detection machine

1. Main technical indicators

circumferential magnetization Current: AC 0-4000a continuously adjustable, with power off phase control (no misses);

Longitudinal magnetization magnetic Potential: AC 0-18000at continuously adjustable, with power off phase control (no missing);

Power supply: Three-phase four line, 380v±10%, 50Hz, about 80A;

Flaw detection beat: 8 seconds/piece;

Electrode spacing: 50-600mm;

Magnetization method: Electricity, coil method (or magnetic yoke method);

Ultraviolet intensity: The ultraviolet strength from 380mm of workpiece is not less than 4000μw/cm².

2. Function and Application

The equipment uses semi-automatic control, the compound magnetization, the magnetizing current can adjust continuously. The machine is suitable for the detection of the external surface crack and near-surface crack of the engine connecting rod, bearing roller, motor shaft, camshaft and other products.