td400-60w type lifting ultraviolet flaw detection lamp

1,td400-60w Type Lifting UltravioletFlaw detection lamp

2, 381mm, ultraviolet illumination degree ≥9000uw/cm2

3. Light Source Brand: Japan-Asia Optics (Japanese)

4. Type of light source: Led Point Light source module

5, Input power: 220V 50Hz

6. Energy consumption: 60W

7. Wavelength: 365nm

8. Standard irradiation Range: 300*500mm

9, light use time: ≥ 30,000 hours (under the standard voltage)

Black Light is a special type of gas discharge lamp, the structure and electrical characteristics of the lamp is the same as the general lighting fluorescent lamp, but the coating of the tube wall is different. A black light can emit a person's invisible ultraviolet rays, and agricultural pests have a great

Phototaxis, so it is widely used in agriculture. The lamp has h 120, H 140 model, its rated voltage power 220V, the power is 20W, 40W respectively. Power supply can have AC and DC two kinds. AC power supply has "black light Shing" and "High-voltage grid pest-killing lights" and so on.

The "Black Light lamp" produces light within the ultraviolet range, and its spectra are limited to long-wave ultraviolet regions.

The black light may also be very inefficient to form, by simply using wood glass instead of transparent glass as a common incandescent bulb's cladding. This is the way to create the first black light lamp light source. Although it is cheaper than the fluorescent lamp source, only 0.1% of the input power is converted to usable radiation. Black-light bulbs produce a large amount of ultraviolet light, which can become a dangerous hot spot because of its low efficiency. More dangerously, high power (hundreds of watts) mercury vapor black lamps are used in ultraviolet fluorescent powder and Wood's glass envelopes, mainly for theatrical and concert displays, and they also become very hot under normal use.