Sheyang county Tengda flaw Detection Machine factory
Home > Industry knowledge > Content
Product Categories

Sheyang County, Jiangsu Province Tengda flaw Detection machine factory

Phone: 0515-82385718

Fax: 0515-82331542


Add: Jiangsu Sheyang Economic Development Zone (west)

Contact Person: Mr. Zhu

Phone: 13004587009


Industry knowledge

Common faults of magnetic particle flaw detection machine

Magnetic Particle flaw Detection machineThe use of the process will always present a variety of failures, which will lead to the delay in our work, the following is a summary of a few common failures, and the proposed solution is as follows:

Magnetic particle flaw detection machine machine automatic shutdown:

The machine has the ability to detect battery, when the battery is too low, the instrument will automatically shutdown. Magnetic particle flaw detection machine can be charged for a period of time, or directly to the power adapter, and then boot.

Magnetic particle flaw Detection machine machine cannot boot:

1, connect the power adapter, frequently open the instrument power soft switch.

2, frequently press the power button, but the interval should be not less than half a minute;

3, check the battery is sufficient to install a reliable detector, or directly connected to the power adapter after the boot;

4. If the above method is invalid, connect the power adapter to charge the battery for half an hour before powering on.

Home | About Us | Product Show | News Center | Industry knowledge | Contact Us | Walls | XML地图 | Mobile